Radiation Detection Equipment

NDS Products

ND-2000 Radiographic Survey Meter


ND-2000 Radiographic Survey Meter - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • Three Range Dustproof Radiographic Survey Meter
  • Rugged Two Piece Nylon Reinforced Case and Handle
  • LCD Display
  • Display Available in mR/hr and uSv/hr
  • Gamma and X-Ray From 80-2000 KeV Within 20%
  • Three Ranges 0-1000, 0-100, 0-10 mR/hr or 0-10,000, 0-1000, 0-100 uSv/hr
  • 3lbs, 13ozs/1.73 kgs with batteries
  • 4.4" W x 7.75" L x 6.25" H, including handle
  • Halogen Quenched, Energy Compensated GM Tube, Effective Length and Diameter: 0.625" x 0.194", Wall Thickness 90 mg/cm²
  • Saturation in excess of 1000R/hr when calibrated and maintained properly
  • Individual Calibration Potentiometers for each range
  • Operates on two "D" Cell batteries providing over 200 Hours of continuous use with Alkaline Batteries
  • Regulated High and Low Voltages
  • Drop Tested from one meter in excess of twenty five times with no damage or failures
  • Operating Temperature: -20 to 50 °C (-4 to 122 °F), Humidity: Non-Condensing 95%
  • Options: Internal Click Style AUDIO ND-2000A, External Detector Probe ND-2000P
  • CE

RA-500 RATE ALARM


RA-500 RATE ALARM - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • Rugged Die Cast Aluminum Belt Worn Rate Alarm
  • Meets NRC Requirements For Personal Monitoring
  • Alarms at 500 mR and Above
  • System Test Includes Battery and Alarm Test
  • Alarm Output is 100 Decibles at 6 Inches
  • Recessed Controls Provide Against Accidental Turn-Off When in Use and Provides Damage Protection
  • Operates on One 9 Volt Battery
  • Halogen Quenched GM Tube: Gamma and X-Ray From 80-2000 KeV +/- 20% - Effective Length and diameter :0.625" x 0.194". Wall thickness: 90mg/cm squared
  • 24 Turn Calibration Potentiometer
  • Operating Temperature: -20 to 50 °C (-4 to 122 °F), Humidity: Non-Condensing 95%
  • 2.5"W x 4.25"L x 1.25"D Excluding Belt Loop or Clip
  • 8 Ounces Including Battery
  • CE

W138 DOSIMETER


W138 DOSIMETER - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • 0-200 mR direct reading dosimeter
  • Gamma and x-ray from 16-6100 KeV +/- 10%
  • Meets ANSI specifications N13.5 and N322
  • Barrel construction is of a durable, electrically conducting carbon fiber loaded liquid polymer
  • All metal spring loaded clip is attached to barrel
  • Can be charged with most available dosimeter chargers providing at least 195 volts
  • Temperature range is between -20 degrees and 50 degrees Celsius
  • Humidity levels up to 90%
  • Altitudes greater then 50,000 feet
  • Shock, vibration and immersion tests meets Military and ANSI requirements
  • Linear scale
  • Length: 4.5"(12.4cm), Diameter: 0.6"(1.5cm)
  • Weight: 1.0 oz (25 grams)
  • All dosimeters come calibrated and includes calibration certification and decal
  • Two year limited warranty from date of purchase
  • Other model ranges available: W138 (0-200mR), W138S (0-2mSv), W500 (0-500mR/hr), W500S (0-5mSv), W725 (0-5R), 730 (0-20R), 742 (0-200R), 746 (0-600R).

ND-100 DOSIMETER CHARGER


ND-100 DOSIMETER CHARGER - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • Direct Reading Dosimeter Charger
  • Durable die cast aluminum case with four rubber feet
  • Compatible with all direct reading dosimeters
  • Operates on two "C" cell batteries
  • Power activated by contact with dosimeter
  • Uses bright 2.47V bulb
  • 4.6" L x 3.6" W x 3.4" H
  • 1 pound, 3 ounces

Operating Temperature: -20 to 50 °C (-4 to 122 °F), Humidity: Non-Condensing 95%

ND-100L
same as ND-100 except has an LED for light source and operates on two "AA" batteries


ND-4000B AREA MONITOR


ND-4000B AREA MONITOR - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • 20 VAC hard wired or plug-in economical Area Monitor
  • Non-adjustable trip point at 2 mR/hr
  • Will activate and 120 VAC device such as lights and sirens
  • Two 5 amp 120 VAC remote alarm outlets
  • One AC power On/Off green indicator and one red alarm trip indicator
  • Operating Temperature: -20 to 50 °C (-4 to 122 °F), Humidity: Non-Condensing 95%
  • NEMA 3R steel case: 8" W x 9" H x 5" D
  • 6 pounds
  • Halogen quenched energy compensated GM tube, Gamma and X-Ray from 60-2000 KeV +/- 20%

ND-4000BLA AREA MONITOR


ND-4000BLA AREA MONITOR - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • 120 VAC hard wired or plug-in economical Area Monitor with red rotating warning light and audio alarm
  • Non-adjustable trip point at 2 mR/hr
  • Will activate and 120 VAC device such as lights and sirens
  • Two 5 amp 120 VAC remote alarm outlets
  • One AC power On/Off green indicator and one red alarm trip indicator
  • Operating Temperature: -20 to 50 °C (-4 to 122 °F), Humidity: Non-Condensing 95%
  • NEMA 3R steel case: 8" W x 24" H x 5" D
  • 8.5 pounds
  • Halogen quenched energy compensated GM tube, Gamma and X-Ray from 60-2000 KeV +/- 20%

Ludlum

Ludlum MODEL 3 GENERAL PURPOSE SURVEY METER


Ludlum MODEL 3 GENERAL PURPOSE SURVEY METER - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
  • Supports GM & Scintillation Detectors
  • Rugged Construction & Low Price
  • 4-Range Analog Ratemeter
  • Greater than 2000 Hour Battery Life
  • Audio On-Off, BAT CHECK
  • Options & Accessories for Multiple Applications

Ludlum Model 3-IS


Ludlum Model 3-IS - NDT Repair Service & Supply, Inc. | Morgan City, LA 70380
Intrinsically Safe Survey Meter European Conformity
  • Intrinsically Safe
  • Rugged
  • 4-Range Analog Ratemeter
  • Supports GM & Scintillation Type Detectors

Contact us for your special pricing today!

 Our Mission

NDT Repair Service & Supply, Inc. is dedicated to the highest quality of customer service and support for our valued customers. Our pledge has gained the trust of our customers for over 26 years by providing a professional team highly trained in the products and services our customers are seeking to meet the demands for their clients. We are committed to quality and safety in all the products and services we offer and to meet or exceed our customers expectations thru performance and reliability. We will always strive to service our customers with the upmost integrity, and to their complete satisfaction.

7912 LA-182
Morgan City, LA 70380

Phone: 985-385-3293 & 985-385-3294
Fax: 985-385-3299

 Navigation

Home Site Map Contact us


Hosting & Design Provided by Jim Pierces Computer Service © 2021 NDT Repair Service & Supply, Inc.